Buffalo Quad Pro – Various Bits and Pieces

Download the latest firmware here

http://www.buffalotech.com/support/downloads/

The latest firmware for the Quad Pro (as at 2011.04.20) is http://www.buffalotech.com/support/getfile/ls_series-141.zip

Information about EM Mode

http://buffalo.nas-central.org/wiki/EM_Mode#How_to_get_out_of_EM_Mode:_2

http://forums.buffalotech.com/t5/Storage/FAQ-1-of-5-EM-Mode-boot-procedures-please-read-this/td-p/11008

http://forums.buffalotech.com/t5/Storage/FAQ-2-of-5-Force-Firmware-update-procedure-please-read-this/td-p/11011

http://forums.buffalotech.com/t5/Storage/FAQ-3-of-5-TFTP-boot-procedure-please-read-this/td-p/11015

Getting out of EM Mode

http://klevstul.posterous.com/getting-the-buffalo-out-of-emergency-mode

More about the Linkstation Firmware Flasher

http://buffalo.nas-central.org/wiki/The_LinkStation_firmware_flasher

http://buffalo.nas-central.org/wiki/LS-Pro_-_Using_the_Firmware_Updater

How to shutdown the NAS

1. Move the power switch to the ‘Off’ position(rear). The LinkStation Live will shut down after about 45 seconds.

2. While holding down the function button(rear for 6 sec), move the power switch to the ‘On’ postion(rear). The Function LED will begin to flash blue.

3. Push the Function button again while the Function LED is flashing.

4. LED on the front will flash Blue, then will turn to Green when process is complete.

http://buffalo.nas-central.org/wiki/Recover_a_non_working_%22bricked%22_Linkstation

Posted on April 20, 2011, in Buffalo Quad Pro NAS. Bookmark the permalink. Leave a comment.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: